Updated November 2026

A 1 30 half marathon pace works out to about 6:52 per mile (roughly 4:16 per kilometer) for 13.1 miles. This guide shows you how to calculate that number, break it into race splits, and hold it when fatigue sets in. You will also learn how to adjust for hills, weather and your own fitness.

Calculate Your Target Pace

A 1:30:00 finish is 5,400 seconds. Divide that by 13.1 miles and you get about 412 seconds per mile, or 6:52 per mile. If you race on a course measured in kilometers, divide 5,400 by 21.1 and you get roughly 256 seconds, or 4:16 per kilometer.

Shopping for one? See our guide: First Ever Marathon Time: 3 Best Guides and Pace Tools for First-Timers.

Most race watches and pace calculators will confirm these numbers. Write your target per-mile pace on your wrist or bib so you can glance at it without doing math mid-race.

Build Your Pace Splits

Splitting the race into segments makes the goal feel manageable. Use this table as a starting point:

Checkpoint Cumulative time Target pace per mile
Mile 1 6:52 6:52
Mile 3 20:36 6:52
Mile 6 41:12 6:52
Mile 9 61:48 6:52
Mile 10 68:40 6:52
Finish (13.1) 1:30:00 6:52

Your first mile will often feel slow because of crowds and warm-up. Don’t chase it. Settle in by mile two and let the average even out.

Hold the Pace in Practice

Pacing is a skill you build in training, not on race day. Work through these steps during your long runs and tempo sessions:

  1. Run 3 to 5 miles at your goal pace on a flat route to feel what 6:52 actually demands.
  2. Do a tempo session of 4 to 6 miles at a pace slightly faster than goal, which helps you hold goal pace more comfortably.
  3. Practice a 10-mile run with the last 3 miles at goal pace to simulate late-race fatigue.
  4. Check your effort, not only your watch. You should be able to speak in short sentences at goal pace.

A pacing plan is only useful if your fitness supports it. If you are new to the distance, review How to Pace Your First Half Marathon: A Step-by-Step Guide for Beginners and First Half Marathon Pace: How to Set and Hold the Right Speed for more on building pacing judgment.

Adjust for Course and Conditions

Hills, wind and heat all change how fast you can run without overspending. On hilly courses, aim for consistent effort rather than consistent pace. Let your watch drift a few seconds slower on climbs and make up the time on descents, but avoid pushing hard downhill, since that can wreck your quads.

Heat is the biggest variable. As temperatures climb, slow your target by 10 to 30 seconds per mile or more, depending on humidity. Trying to force 6:52 in heat often leads to a fade in the final four miles.

Taper properly before race day so your legs are fresh enough to hold pace. The approach is covered in Your Guide to the Half Marathon Taper Week.

Plan Your Fueling

Fueling affects whether you can hold pace late in the race. Most runners need carbohydrates during any half marathon effort lasting over about an hour. Practice your fueling in training so nothing is new on race day. For timing guidance, see When to Take Energy Gels During Half Marathon: A Step-by-Step Timing Guide.

Common Mistakes

  • Starting too fast. Going out 15 seconds per mile quicker than goal often costs you two minutes or more at the end.
  • Relying only on the watch. GPS can drift between tall buildings, so trust effort as well.
  • Ignoring the course profile. A flat-pace plan on a hilly course is unrealistic.
  • Skipping practice runs at goal pace, so the number feels unfamiliar on race morning.
  • Changing shoes or gear late in the training block.
  • GPS running watch: Lets you track pace per mile in real time and set alerts for splits. View on Amazon
  • Race belt with gel holder: Keeps fuel within reach so you can take it on schedule. View on Amazon
  • Lightweight running shoes: Comfortable shoes you have already trained in help you hold pace without foot discomfort. View on Amazon

FAQ

Is a 1:30 half marathon realistic for a beginner?

It depends on your current fitness and training history. Many runners need a year or more of consistent running to reach this goal, so check your recent race times before committing.

Should I run negative splits to hit 1:30?

A slightly even or gently negative split usually works best. Running the second half faster by a large margin often means the first half was too fast.

What if I fall behind pace early on?

Don’t panic-sprint to catch up. Make small, controlled gains over several miles and reassess at the halfway point.

Conclusion

A 1:30 finish requires a steady 6:52 per mile, planned in splits and practiced in training. Adjust for heat and hills, fuel on schedule, and avoid starting too fast. Consult a qualified coach or medical professional before starting any new training plan.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our marathon & half-marathon guides, checking product details against manufacturer specifications and owner feedback.