Updated November 2026
A 4 hour marathon pace chart gives you the exact time you need to hit at every mile marker to finish in four hours flat. The target works out to about 9:09 per mile, or roughly 5:41 per kilometer, and this guide shows you how to build your own chart, adjust it for the course, and use it on race day. You will also get a sample split table and a checklist for making sure your plan holds up after mile 20.
Why a Pace Chart Matters for a 4 Hour Marathon
Four hours is a realistic goal for many first-time and returning marathoners, but it leaves very little room for error. Going out 30 seconds per mile too fast in the first six miles can cost you several minutes by the finish, because the cost of early overpacing shows up as fatigue in the final 10K. A written chart keeps you honest when adrenaline pushes you faster than planned.
Shopping for one? See our guide: First Marathon Runner Under 2 Hours: 4 Best Books to Study the Pace.
If you are still deciding whether four hours fits your current fitness, read Marathon Pace for 4 Hours: Splits, Targets and How to Hold It for a broader look at what the number asks of you. For readers who want a faster finish, Sub 4 Hour Marathon Pace: Splits, Targets and How to Hold It covers the same math with a bit more margin.
The Core Math Behind the Chart
Four hours equals 240 minutes. Divide by 26.2 miles and you get 9.16 minutes per mile, which is 9:09 per mile once you convert the decimal to seconds (0.16 × 60 ≈ 9.6 seconds, rounded down to 9:09 when you account for the exact 26.2 distance and the way most watches round). In kilometers, 240 minutes divided by 42.195 km gives about 5:41 per kilometer.
Use these as your anchor numbers:
- Per mile: 9:09
- Per kilometer: 5:41
- Total finish time: 4:00:00
- Average pace to hold: 9:09/mile for 26.2 miles, or 9:09 for every mile marker
Because the marathon is 26.2 miles and not an even 26, the final 0.2 miles will show a slightly different split on your watch. Plan for that, and do not let a short final segment fool you into speeding up too early.
Step-by-Step: Building Your Own 4 Hour Marathon Pace Chart
Step 1: Set Your Target and Your Buffer
Decide whether your goal is exactly 4:00:00 or a finish a few minutes under. Many runners set a target of 3:58:00 to create a small buffer for slow aid stations or a hilly section. A 2-minute buffer translates to about 4.5 seconds per mile of extra pace.
Step 2: Calculate Your Mile Splits
Multiply your target per-mile pace by each mile number to get your cumulative split. Round each cumulative time to the nearest second. Here is a sample chart for a straight 9:09 target:
| Mile | Pace per Mile | Cumulative Time |
|---|---|---|
| 1 | 9:09 | 0:09:09 |
| 3 | 9:09 | 0:27:27 |
| 5 | 9:09 | 0:45:45 |
| 10 | 9:09 | 1:31:30 |
| 13.1 | 9:09 | 2:00:00 |
| 15 | 9:09 | 2:17:15 |
| 20 | 9:09 | 3:03:00 |
| 22 | 9:09 | 3:20:18 |
| 26.2 | 9:09 | 4:00:00 |
Step 3: Build in a Realistic Early-Race Adjustment
Most runners should not hit 9:09 exactly in miles 1 through 3. Crowds, the start line shuffle and downhill sections often pull you faster. A common approach is to run the first two miles 5 to 10 seconds per mile slower than goal, then settle into target pace from mile 3 onward. Your chart can reflect this:
- Miles 1–2: 9:15 each (cumulative 18:30)
- Miles 3–20: 9:09 each
- Miles 21–26.2: hold 9:09 if you feel strong, or accept 9:15 if fatigue sets in
Step 4: Add Your Course Notes
Look at the elevation profile for your race before you finalize the chart. Mark any significant climbs and plan to run them by effort rather than by watch. On a hill, your pace will drop, and that is fine as long as you make up time on the descent without braking hard. Write the expected pace next to each hill mile so you are not surprised on race day.
Step 5: Convert to Kilometer Splits if Needed
If your race is marked in kilometers, use 5:41 per km as the base. Cumulative splits at 5 km, 10 km, 21.1 km and 42.195 km are about 28:25, 56:50, 1:59:59 and 4:00:00.
Race-Day Tools and Pace Aids
Your chart is only useful if you can see it. A few practical tools help you check your pace without constant math.
- A GPS watch set to show current pace and lap pace.
- A printed pace band or pace card on your wrist or belt.
- A rough mile-by-mile cheat sheet on a card you can read at a glance.
- A plan for when your watch and the course mile markers disagree (they often do by a few tenths of a mile).
For the pace band route, Pace Band for Marathon: How to Make and Use One (Step-by-Step) explains how to build one that fits your chart.
Recommended gear
A GPS running watch with a lap-pace screen lets you check your split at every mile without doing arithmetic while you run. Look for a model that lets you set a custom pacing alert, so it tells you when you drift outside your target range.
A waterproof pace band or race wrist card keeps your splits visible even when your watch battery is low or you are not looking at your arm. Choose one with clear, large numbers and a mile marker column.
A small running belt with a zippered pocket holds a gel or a folded copy of your chart without bouncing around. It is useful for longer races where you want to refer to your plan after mile 18.
Common Mistakes to Avoid
- Starting too fast. The crowd and adrenaline push most runners 15 to 30 seconds per mile too quick in the first mile. Check your watch at mile 2 and ease back if needed.
- Trusting the course mile markers over your watch. Watches drift, and the course may be slightly long or short. Run your effort, not just the number on the screen.
- Ignoring the last 6 miles. Fatigue makes pace feel harder, so the same effort gives a slower split. Plan a little extra margin for miles 21 to 26.
- Forgetting aid stations. Each stop costs time. Factor 20 to 40 seconds per stop into your buffer if you plan to walk through.
- Not practicing the plan. Run a few long runs at or near goal pace so the chart reflects how you actually feel.
Tips for Using Your Chart Well
Print two copies, one for your bag and one for your wrist or pocket. Write your target split in pencil at miles 5, 10, 13.1, 20 and 26.2 so you can spot the key checkpoints quickly. If you train with a pace group or a friend, agree on a plan for what happens if one of you falls behind. Building a race plan that accounts for hills, heat and fatigue is also covered in 4 Hour Marathon Pace Per Mile: Splits, Math and a Race-Day Plan.
For runners using an online tool to double-check their numbers, Online Marathon Pace Calculator: 3 Best Picks for Race Planning lists options for converting finish times into splits.
FAQ
What pace do I need for a 4 hour marathon?
You need an average pace of about 9:09 per mile, or 5:41 per kilometer, sustained across the full 26.2 miles.
Should I start slower than 9:09 per mile?
Many runners benefit from starting 5 to 10 seconds per mile slower for the first two or three miles, then settling into target pace. This helps avoid early fatigue.
How do I convert a per-mile split to a per-kilometer split?
Divide your per-mile pace by 1.609. For 9:09 per mile, that gives about 5:41 per kilometer.
Is a negative split possible for a 4 hour marathon?
Yes, but it requires disciplined early pacing. Run the first half at about 9:15 per mile and aim to finish the second half at 9:03 or 9:05 if you feel strong.
What if my watch and the course mile markers do not match?
This is common. Trust your effort and your watch for pacing, and use course markers as a rough check. Race-measured courses are usually accurate, but GPS can drift in tall buildings or tree cover.
How much time should I allow for aid stations?
A realistic allowance is 20 to 40 seconds per stop if you walk through to drink. Slowing to grab water and taking a few steps adds up over the full course.
Can I use this chart for a half marathon?
No. The chart is built for the full 26.2-mile distance. For a half marathon, you would use the 13.1-mile split instead, as covered in other pacing guides on this site.
Should I consult a professional before attempting a marathon?
Yes, especially if you have a heart condition, high blood pressure, or have not trained consistently. A doctor or sports medicine professional can advise on whether a marathon is appropriate for you.
Conclusion
A 4 hour marathon pace chart turns a single goal into a clear sequence of checkpoints you can follow. Aim for about 9:09 per mile on average, start a few seconds slower to protect your legs, and adjust for hills and aid stops. Practice the plan in training so race day feels familiar rather than new.

