Updated November 2026
Pace for a half marathon is the single biggest factor in whether you finish strong or limp across the line. This guide shows you how to estimate a realistic goal pace from your recent running, break the 13.1 miles into manageable chunks, and hold steady when the adrenaline tries to push you faster than you should go.
Step 1: Estimate Your Goal Pace
Start with a recent race result or a hard time trial. A 5K or 10K time works well. Plug it into a race-time predictor (many free calculators exist online), and it will give you an estimated half marathon finish time. Divide that finish time by 13.1 to get your target pace per mile.
Shopping for one? See our guide: First Ever Marathon Time: 3 Best Guides and Pace Tools for First-Timers.
For example, if your predicted finish is 2:00:00, your goal pace is about 9:10 per mile (120 minutes divided by 13.1). If you have no recent race data, run three to four easy miles and note your comfortable pace. Then add 30 to 60 seconds per mile for a race effort, since most runners cannot sustain their easy pace for 13 miles.
Step 2: Plan Your Pace Splits
Write down your target split for each mile or each 3-mile segment. This turns a vague goal into something you can check on your watch.
- Write your goal pace in minutes per mile.
- Set a first-mile target about 10 to 15 seconds slower than goal pace to avoid the crowd-driven surge.
- Hold goal pace for miles 2 through 10.
- Use miles 11 through 13.1 as your push zone, but only if your effort still feels controlled.
Keep your split card on your wrist or tucked into a sleeve so you can glance at it without stopping.
Step 3: Use Effort, Not Just the Watch
GPS watches can lag by a few seconds and can read high or low in tall buildings or tree cover. Pair your watch with a perceived effort check. At goal pace, you should be able to speak in short sentences but not hold a full conversation. If breathing becomes ragged by mile 4, you are running too fast regardless of what the screen says.
Lap data is also more reliable when you average over a full mile rather than reacting to each 0.1-mile change. Ignore small fluctuations.
Step 4: Adjust for Hills, Heat and Fatigue
Pace will shift with conditions. On hills, run by effort and accept slower mile splits on the climbs, then recover pace on the descents without pushing hard. In heat, expect your pace to drop by 15 to 30 seconds per mile or more, depending on temperature and humidity. Slow down early rather than paying for it after mile 9.
If you feel unusually flat, dizzy or nauseous, slow down significantly or walk. Health symptoms during a race warrant medical attention, so consult a professional if you have any concerns about your heart or other conditions before race day.
Common Mistakes to Avoid
- Starting with the crowd and burning energy in the first two miles.
- Setting a goal pace from a 5K you ran on a fresh, tapered day rather than typical training form.
- Ignoring fueling: longer efforts need planned intake, so review your gel timing before race day.
- Trying a new shoe, outfit or pace strategy on race day instead of during training.
- Checking your watch every few seconds, which breaks rhythm and invites panic over small changes.
Recommended Gear
- Running watch with lap pacing: A GPS watch that displays current pace and lap average helps you hold splits without constant guessing. View on Amazon
- Pace band or split card: A printed or waterproof wrist band lets you check target splits at a glance. View on Amazon
- Race-day armband for phone or gels: Keeps fuel within reach so you can take on calories at planned mile markers. View on Amazon
Where to Learn More
If you are new to racing, How to Pace Your First Half Marathon: A Step-by-Step Guide for Beginners walks through the same process in more detail. For a deeper look at speed targets, see First Half Marathon Pace: How to Set and Hold the Right Speed. Plan your final weeks with Your Guide to the Half Marathon Taper Week, and decide on fuel timing using When to Take Energy Gels During Half Marathon: A Step-by-Step Timing Guide.
FAQ
What is a good pace for a half marathon?
A good pace is one you can hold steadily for 13.1 miles, and it depends on your fitness. Many recreational runners finish between 10 and 12 minutes per mile, while experienced runners may average under 8 minutes per mile.
Should I run negative splits in a half marathon?
Negative splits, where the second half is faster than the first, are an excellent goal for most runners. Start at or slightly slower than goal pace and only increase effort if you feel strong late in the race.
How do I know if I started too fast?
If your breathing is labored before mile 4 or your legs feel heavy by mile 6, you probably started too fast. Slow down by 10 to 20 seconds per mile to recover and aim to finish strong rather than fade.
Conclusion
Pace for a half marathon comes down to an honest goal, a clear split plan and disciplined early miles. Estimate your target from recent running, write your splits down, and let effort guide you when conditions change. Start conservatively, and you will have the strength to finish the race you trained for.

